 |
What is the Bore Size?
2-8" bore is our specialty (inside diameter of
the cylinder body.) If you don't know, provide the
outside diameter and operating pressure and we can
figure the most probable bore size with that information.
|
|
What is the Stroke
of a Cylinder?
Amount of travel, from fully extended to fully retracted. |
|
What are Hook ups
/ Mounts?
This refers to the manner in which the cylinder, attaches
to the equipment. i.e.. clevis, lug , crosstube, or
trunnion. If in the event the base and rod differ from
each other, you need to specify briefly what style is
used for which end. |
|
What is PSI?
PSI is an acronym for Pounds per Square Inch. Our
normal range of pressures are 150 operating pressure,
250 test pressure for air cylinders. 1500 - 4000 operating
pressure for hydraulic, and a test pressure up to
4500 PSI.
|
|
Port Size?
We can supply standard ports NPT or SAE, and all types
of control valves / manifolds. |
|
How fast can I get
my product?
Our standard delivery is 4-6 weeks on all custom built
cylinders. This can be negotiated, and expedited deliveries
can be purchased. |
|
What is Retracted
Length?
Retracted length is the distance from the center of
the rod pin to the center of the base pin when the cylinder
is fully closed. However if the cylinder happens to
have a trunnion, the length will be determined from
the center of the journal on the trunnion to the the
end with a rod mount. ( center of rod mount) |
